Frequently Asked Questions
1)......What kind of boilers does the Tadpole work with?
2)......Does the Tadpole work with all heating systems
3)......Does the Tadpole work with a corrosion inhibitor?
4)......Does the Tadpole require electricity?
5)......After the installation of the Tadpole, will I still need a corrosion inhibitor?
6)......Can the Tadpole help reduce the noise in my system?
7)......Can the Tadpole be used in a sealed system which has an expansion vessel?
8)......Does the Tadpole work with combination or system boilers?
9)......Can the Tadpole be installed with an oil boiler?
10)....Will I need to bleed the radiators after the Tadpole is installed?
11)....Can the Tadpole be connected to a solar heating system?
| 11) | Yes generally it can, but two Tadpoles will be needed. The first in the normal circuit, and the second in the solar thermal system, if it can be installed where the pump will draw the fluid through the Tadpole. Additionally, as the Tadpole will not be installed in the highest part of the system, one needs to ensure that there is an air vent on the roof, that will release trapped air from the top of the system. |
12)....Will the Tadpole help increase the efficiency of a back boiler?
13)....Will the Tadpole benefit a ground source heat pump, and if so, how?
14)....How long does it take to install a Tadpole?
15)....What guarantee do you offer? Save up to 25% on your fuel bills.
Order here
© Copyright Frog Enterprises 2008