Frequently Asked Questions
1)......What kind of boilers does the Tadpole work with?
2)......Does the Tadpole work with all heating systems
3)......Does the Tadpole work with a corrosion inhibitor?
4)......Does the Tadpole require electricity?
5)......After the installation of the Tadpole, will I still need a corrosion inhibitor?
6)......Can the Tadpole help reduce the noise in my system?
7)......Can the Tadpole be used in a sealed system which has an expansion vessel?
8)......Does the Tadpole work with combination or system boilers?
9)......Can the Tadpole be installed with an oil boiler?
10)....Will I need to bleed the radiators after the Tadpole is installed?
11)....Can the Tadpole be connected to a solar heating system?
12)....Will the Tadpole help increase the efficiency of a back boiler?
13)....Will the Tadpole benefit a ground source heat pump, and if so, how?
| 13) | For the greatest benefit, 2 Tadpoles will need to be installed, one in the normal heating system, the other in the ground source loop. The result will be doubly beneficial. The temperature of the fluid in the ground source loop will be higher, so there will be more heat available to heat your water. It has been found that the water temperature can reach a higher degree than standard systems, so more heat is obtained for the same effort. This has produced savings of well over 25% and provides a hot water temperatures comparable to that which can be obtained from fossil fueled systems. |
14)....How long does it take to install a Tadpole?
15)....What guarantee do you offer? Save up to 25% on your fuel bills.
Order here
© Copyright Frog Enterprises 2008