Frequently Asked Questions
1)......What kind of boilers does the Tadpole work with?
2)......Does the Tadpole work with all heating systems
3)......Does the Tadpole work with a corrosion inhibitor?
4)......Does the Tadpole require electricity?
5)......After the installation of the Tadpole, will I still need a corrosion inhibitor?
6)......Can the Tadpole help reduce the noise in my system?
7)......Can the Tadpole be used in a sealed system which has an expansion vessel?
8)......Does the Tadpole work with combination or system boilers?
9)......Can the Tadpole be installed with an oil boiler?
10)....Will I need to bleed the radiators after the Tadpole is installed?
11)....Can the Tadpole be connected to a solar heating system?
12)....Will the Tadpole help increase the efficiency of a back boiler?
13)....Will the Tadpole benefit a ground source heat pump, and if so, how?
14)....How long does it take to install a Tadpole?...
| 14) | We allow half a day to drain down the system, cut the pipe and plumb in the Tadpole, fill the system again, check for leaks, and then re-commission the system, and finally bleed any radiators that need bleeding of remaining trapped air. |
15)....What guarantee do you offer? Save up to 25% on your fuel bills.
Order here
© Copyright Frog Enterprises 2008