Frequently Asked Questions
1)......What kind of boilers does the Tadpole work with?
2)......Does the Tadpole work with all heating systems
3)......Does the Tadpole work with a corrosion inhibitor?
4)......Does the Tadpole require electricity?
5)......After the installation of the Tadpole, will I still need a corrosion inhibitor?
| 5) | A corrosion inhibitor will not be necessary with the Tadpole installed as there is no dissolved air in the water. It is the dissolved air that creates rust. However if you have a new boiler, then the boiler warranty may require that an inhibitor is added to the water. |
6)......Can the Tadpole help reduce the noise in my system?
7)......Can the Tadpole be used in a sealed system which has an expansion vessel?
8)......Does the Tadpole work with combination or system boilers?
9)......Can the Tadpole be installed with an oil boiler?
10)....Will I need to bleed the radiators after the Tadpole is installed?
11)....Can the Tadpole be connected to a solar heating system?
12)....Will the Tadpole help increase the efficiency of a back boiler?
13)....Will the Tadpole benefit a ground source heat pump, and if so, how?
14)....How long does it take to install a Tadpole?
15)....What guarantee do you offer? Save up to 25% on your fuel bills.
Order here
© Copyright Frog Enterprises 2008